• Start WinOS/2
• Open WinOS/2 Main Group
• Open Control Panel
• Open Drivers
• Click Add
• Click "Unlisted or Updated Driver"
• Click OK
• Browse, locate the X:\os2\drivers directory and select the sbawed2 directory (should have been installed when you installed OS/2 Warp)
• Click OK (should install four drivers - select what you need)

Next, download the WinOS/2 driver pack following the instructions contained within EXACTLY. This is VERY important!

Next, check your system.ini file settings for the card. They should look similar to this: (note I have not included the entire file, just the lines that are specific to the AWE64 setup and their section headers to help you locate the lines)

[boot]
drivers=msmixmgr.dll mmsystem.dll winmm16.dll
drivers=msmixmgr.dll
[386Enh]
device=vsbawe.386
device=vsbpd.386
[drivers]
AUX=sb16aux.drv
MIDI=sbpfm.drv
Wave=sb16snd.drv
MIDI1=sb16snd.drv
MIDI2=sbawe32.drv
[sndblst.drv]
PnpFlag=0
port=220
Int=5
DmaChannel=1
MidiPort=300
HDmaChannel=5
AWEPort=620
FDMAPlayBack=1
FDMARecoding=1
FullDuplex=1
SaveOnExit=1
MIDIWaveIn=c000c000
CDWaveIn=c000c000
LineInWaveIn=c000c000
MicWaveIn=0
MasterWaveIn=a800a800
MIDIVoiceIn=c000c000
CDVoiceIn=c000c000
LineInVoiceIn=c000c000
MicVoiceIn=0
MasterVoiceIn=ffffffff
MuxVoiceIn=1e
MuxWaveIn=1e
MuteVirtual=0
AGCVoiceIn=1
AGCWaveIn=1
VoiceVolume=7, 7
FMVolume=31, 31
CDVolume=22, 22
LineVolume=0, 0
MicVolume=0, 0
MasterVolume=23, 23
SpeakerVolume=0, 3
BassTone=12, 12
TrebleTone=8, 8
OutputMixerSwitch=1f
LeftRecordMixerSwitch=95
RightRecordMixerSwitch=8b
RecordGain=1, 1
OutputGain=0, 0
AGC=0

Finally, go back into the Control Panel, select the midi mapper, and select SBAWE32 All.