Installing Fixpaks using the RSU ZIP files.

Updated for CSF 143

NOTE: There are always occasional reports from users with every
Fixpak ever released regarding problems when installing Fixpaks.

While no guarantees are made, the method described below has been
successfully used by myself to apply Fixpak 14 to a Warp 4 System.

What you Need

    A copy of FastKick updated for CSF143
    The diskette ZIP files for the Fixpak
    A copy of InfoZip's UNZIP.EXE

Step by Step Instructions

    1.You'll need

    2.You'll also need InfoZip's UNZIP Utility

    3.Using whatever method of FTP you are comfortable with, go to:
    and, using BINary mode, get all the files in that directory (with the exception of

    4.Create a directory to hold the files and the installation utility

    5.Unzip FASTKICK.ZIP to this directory

    6.Copy all of the ZIP files that you FTP'd from the XR_M014 directory to this same directory.

    7.Copy the InfoZip self-extracting executable to an empty directory, and run the executable.

    8.Copy UNZIP.EXE from this directory to the directory where you have stored the FastKick files and the XR_M014*.ZIP files

    9.Open an OS/2 Command Prompt (window or full screen) and Change to that Directory.

    10.Type the following command at the OS/2 prompt:

    for %1 in (xr_m014*.zip) do unzip -o %1

    11.Again, from the OS/2 Command prompt, run FIX.CMD.

That's all there is to it. Follow the onscreen prompts, and perform a shutdown and re-boot when the installation has completed.

Cumulative list of Fixed APARS in Warp 4, Fixpak 14.

Unless otherwise noted, all content on this site is Copyright © 2004, VOICE