[ARWLAN]
Type = NDIS
Title = ARtem Onair ComCard
Version = 1.42
DriverName = ARWLAN$
Xports = NETBEUI, LANDD

[FILE]
Name = ARLTNDIS.OS2
Path = IBMCOM\MACS

[NETADDRESS]
Display = "Locally assigned network adress (MAC adress)"
Type = HexString
StrLength = 12
Range = 000000000000-FFFFFFFFFFFF
Optional = YES
Editable = YES
Help = "This parameter lets you specify the adapter's MAC adress."

[NODE_ID]
Display = "Workstation name"
Type = String
StrLength = 16
Optional = YES
Editable = YES
Help = "Assign a unique name to your workstation by using this parameter." 

[DESIRED_SSID]
Display = "Network name (SSID)"
Type = String
StrLength = 32
Default = "ARtem"
Optional = YES
Editable = YES
Help = "Enter the service set ID of the wireless network that you want to
access. If you want to be able to join all available wireless networks enter
'ANY' (without quotes)."

[CREATE_IBSS]
Display = "Create new net (peer-to-peer)"
Type = String
StrLength = 4
Set = "yes","no"
NLSSet = "ja","nein"
Default = "NO"
Optional = YES
Editable = YES

[RTS_THRH]
Display = "RTS/CTS reservation threshold"
Type = Decimal
Range = 0-2347
step = 1
Optional = YES
Editable = YES

[FRAG_THRH]
Display = "Packet fragmentation threshold"
Type = Decimal
Range = 256-2346
step = 2
Optional = YES
Editable = YES

[SYSTEM_SCALE]
Display = "Distance between base stations (access points)"
Type = String
StrLength = 8
Set = "WIDE","MEDIUM","NARROW"
NLSSet = "fern","mittel","nah"
Optional = YES
Editable = YES

[MW_ROBUSTNESS]
Display = "Increase interference resistance against microwave oven"
Type = String
StrLength = 4
Set = "yes","no"
NLSSet = "ja","nein"
Default = "NO"
Optional = YES
Editable = YES

[PSP_MODE]
 Display = "Power management"
 Type = String
 StrLength = 20
 Set = "DISABLED","ENABLED","NO_RX_MCAST","QUEUE_MCAST","EPS","EPS_NO_RX_MCAST","EPS_QUEUE_MCAST"
 Default = "DISABLED"
 Optional = YES
 Editable = YES
 Help = "This parameter activates the possible power saving modes. Use EPS
 for optimal results."

[WEP_ENABLED]
 Display = "Use encryption"
 Type = String
 StrLength = 4
 Set = "yes","no"
 NLSSet = "ja","nein"
 Default = "NO"
 Optional = YES
 Editable = YES

[AUTH_TYPE]
 Display = "Authentification method"
 Type = String
 StrLength = 12
 Set = "OPEN_SYSTEM","SHARED_KEY"
 Default ="OPEN_SYSTEM"
 Optional = YES
 Editable = YES
 Help = "This parameter specifies which authentification method is used
 for encrypted transmission. Both the access point and the WLAN-module
 (your wireless NIC) must use the same method."

[TX_KEY]
 Display = "Number of the key used for transmission"
 Type = Decimal
 Range = 1-4
 Optional = YES
 Editable = YES
 Help = "Select which one of the following 4 keys will be used for transmission
 by specifying it's number here."

[KEY_1]
 Display = "Key #1"
 Type = String
 StrLength = 28
 Optional = YES
 Editable = YES
 Help = "The key can be supplied either as a clear-text string (5 or 13
 characters in size) or as a hex string (10 or 26 characters in size with
 a leading '0x')"

[KEY_2]
 Display = "Key #2"
 Type = String
 StrLength = 28
 Optional = YES
 Editable = YES
 Help = "The key can be supplied either as a clear-text string (5 or 13
 characters in size) or as a hex string (10 or 26 characters in size with
 a leading '0x')"

[KEY_3]
 Display = "Key #3"
 Type = String
 StrLength = 28
 Optional = YES
 Editable = YES
 Help = "The key can be supplied either as a clear-text string (5 or 13
 characters in size) or as a hex string (10 or 26 characters in size with
 a leading '0x')"

[KEY_4]
 Display = "Key #4"
 Type = String
 StrLength = 28
 Optional = YES
 Editable = YES
 Help = "The key can be supplied either as a clear-text string (5 or 13
 characters in size) or as a hex string (10 or 26 characters in size with
 a leading '0x')"

[IO_BASE]
 Display = "I/O base adress"
 Type = Hexadecimal
 Range = 180-7F00
 Optional = YES
 Editable = YES
 Help = "This lets you specify a base I/O-adress for your adapter. The
 adapter requires a gap-less sequence of 64 (0x40) free I/O-adresses, 
 starting with the one entered here."

[IRQ]
 Display = "Interrupt level (IRQ)"
 Type = Decimal
 Set = 3, 4, 5, 7, 9, 10, 11, 12, 14, 15
 Optional = YES
 Editable = YES
 Help = "This lets you specify an interrupt level for your adapter. The
 adapter requires one interrupt level (IRQ) exclusively."

[USE_POLLING]
 Display = "Use polling instead of interrupts"
 Type = String
 StrLength = 4
 Set = "yes","no"
 Optional = YES
 Editable = YES
 Help = "This option might help you to enable the adapter in case that
 no interrupt can be assigned to it. This problem is known for some of
 the PCMCIA or CardBus systems around."